New innovations in printed designs for Canadian AEC firms provide opportunity
The demise of printed designs in the Canadian architecture, engineering and construction (AEC) industry may have been greatly exaggerated. With the sector rather stagnant, increasing numbers of AEC firms are now looking to print for its potential value to their businesses as opposed to a troublesome cost centre that needs to be reduced or eliminated. Indeed, a recent ARC Document Solutions study found that only 38 percent of AEC firms plan to go paperless.
What’s behind the surprising fondness for hard copy design drawings? It turns out that recent large-format printing innovations are making it possible for AEC firms in Canada – especially SMBs – to efficiently and cost-effectively churn out high-quality printed materials that differentiate them in the market. At the same time, these new innovations are bringing the costs down when those firms turn to their local print service providers.
In fact, according to the recently released 2015-2020 Wide Format Forecast from InfoTrends, media revenue in North America is now growing at a compound annual rate of 12.8 percent compared to 10.1 percent for the rest of the world.
There are some key reasons why many smaller Canadian AEC firms are turning to large format printers. While larger enterprises have entire departments responsible for managing and maintaining large-format printers, many smaller and midsized AEC shops haven’t traditionally been able to afford that. The costs of acquiring printers, maintaining them and training staffs would simply be too high – especially where colour was involved.
Smaller firms often leaned on print shops for every single geographic information systems (GIS) map, drawings and rendering they needed to produce.
Today, however, more options are available. Prices for large-format printers have dropped considerably, making them much more affordable options for the average AEC firm looking to reduce their outsourcing spend. At the same time, savvy large-format print shops are enabling AEC companies to produce high-quality black-and-white and colour jobs at a faster speed from a single printer. Previously, companies had to buy both monochrome and colour printers to accomplish the same task or work with a print shop that had multiple devices.
And this capability is particularly important to AEC firms today as many Canadian municipalities require design drawings to be submitted in colour. These regulatory requirements underscore where the industry is headed, as AEC firms are designing in colour. Keeping these details and documentation in colour lets designers move this knowledge through colour coding from their screens right into the field. We’re seeing AEC firms across the globe purchasing wide-format colour multi-function printers over monochrome-only solutions and Canada is certainly no exception.
Another key reason for the AEC adoption of large-format is simply for faster turnaround times. Canadian AEC companies are increasingly required to turn around designs and blueprints on the fly – both at their offices and on job sites. Modern wide-format printers are faster than previous generations – up to 60 percent faster in some cases – and are suitable for use in the field and office.
Additionally, a broad range of applications and technological innovations that expedite workflow are now available for use in conjunction with the wide-format printers. New workflow software for managing the print process from end to end makes large-format printing much more efficient. For example, such software allows AEC shops to spontaneously detect and correct corrupted PDFs, automatically switch between small- and large-format pages, and enable on-screen document proofing. Coupled with the speed of the new printers, this can significantly enhance efficiency.
This improved efficiency also contributes to a lowered cost, which is an increasingly important factor for the many AEC firms operating in slowed down economies such as Alberta’s oil sector, for example.
In terms of quality, large-format printing is not the same as making office copies. Control over quality is key because the large-format documents that an AEC firm must produce are mission-critical.
For example, customers often assume they’ll be able to receive brilliant, colourful printed materials because powerful computer-aided design (CAD) software has made that so commonplace. These designs are also incredibly complex. For AEC firms to compete in this environment, they must have the ability to deliver on that expectation.
Fortunately, an emerging generation of large-format printers excel at producing colour documents with crisp lines, fine detail and smooth grayscales that are arguably superior to LED prints. Newer pigments also provide dark blacks, vivid colours, and moisture and fade resistance – even on uncoated bond paper at high speeds.
For Canadian AEC firms to compete in these challenging economic times, they need to be focused on producing the highest quality printed materials as efficiently and cost-effectively as possible. The ability to do that has never been greater.
Small and midsized AEC firms no longer have to invest in huge fleets of printers to keep pace with larger competitors. So, paper lives on as an important instrument in their tool belts – now and for the foreseeable future.
Large-format for small AEC
Former Kodak packaging arm relaunches as MiraclonA new independent company, known as Miraclon, has been founded…
Highlights from EFI’s 20th annual Connect conferenceThe year 2019 has just gotten underway, signalling it is…
Pivoting to print mediaFor one day only, BuzzFeed pivoted to print publishing. On…
Artisan invests in three wide-format Onset pressesArtisan Complete, a Toronto, Ontario-based print provider says it is…
May 14-17, 2019
Packaging Première 2019
May 28-30, 2019
Gala Gutenberg 2019
May 30, 2019
OPIA Excellence in Print Awards 2019
May 30, 2019
OPIA SWOB Golf Tournament 2019
June 5, 2019