Heidelberg to Highlight Anicolor 2 at drupa
March 1, 2016 By PrintAction Staff
At drupa 2016, running from May 31 to June 10 in Germany, Heidelberg plans to present three key new innovations for its Speedmaster XL 75 Anicolor 2 short inking technology, applied to both commercial and packaging printing.
Heidelberg explains its Anicolor advantages are summarized with the formula 90-50-50: “Around 90 percent less waste thanks to fast and constant inking. It takes just 20 to 30 start-up sheets to reach the correct ink levels for a new order. The result is a 50 percent reduction in setup times combined with a 50 percent increase in productivity.”
“We presented the Speedmaster XL 75 Anicolor as prototypes at drupa 2012. We have sold over 200 printing units since then – split down the middle between commercial and packaging printers,” said Stephan Plenz, member of the management board responsible for Heidelberg Equipment. “At the next drupa we will be showing how easy it can be to complete short production runs quickly, flexibly, and economically using offset printing with the Speedmaster XL 75 Anicolor 2.”
The first of three Anicolor 2 innovations highlighted by Heidelberg is the Anicolor Booster, which can be activated at the push of a button on the Prinect Press Center and permits a wider use of inks based on a new setting range for ink density on different printing stocks.
Heidelberg explains, in most cases, Anicolor Booster does away with the need to change the ink chamber as was previously required with very absorbent printing stocks, adding this shortens the setup time in commercial printing since both coated and uncoated paper can now be processed with the same ink series. Heidelberg states this benefit is even more pronounced in packaging printing, with its ever-changing spot colours – up to 15 minutes can be saved here by not having to change the screen roller, which is mostly only required for orders involving the application of opaque white, gold, or silver.
The second innovation of Anicolor 2 highlighted by Heidelberg is a faster washup program that provides for faster ink changes and, therefore, shorter setup times based on 9,000 revolutions per hour instead of the previous 7,000. As a result, Heidelberg explains the changing colour shades can now be achieved up to a minute faster.
The third innovation of Anicolor 2 highlighted by Heidelberg is a new function allowing the operator to choose between “standard,” “short,” or “none” for the ink shut-off time, depending on the colour assignment from one job to the next. The shortened ink shut-off, according to Heidelberg, saves another 20 seconds, while eliminating it altogether reduces the setup time by 40 seconds. The option of “none” is suited for successive orders of the same type.
Anicolor 2 with a new design, new feeder, and the new Prinect Press Center XL 2 will be available as standard from November 2016. A number of technical functions such as the new Anicolor Booster and the faster washup programs will be available earlier from July 2016.
Print this page