Headlines News
Mark Andy adds new features to Digital Pro product line

May 19, 2020
By PrintAction Staff
Digital Pro 3 with Semi Rotary Die cutting and Pre Digital Flexo Print Station, courtesy Mark Andy.

Mark Andy has released a suite of new features on its digital press line, Digital Pro, a line built to tackle short run work. The production digital machine launched in August 2019 with Digital Pro 1, a roll to roll solution and Digital Pro 3, an inline digital hybrid press with a single flexo station and die cutting. The new features make the line capable of additional converting functionalities.

First to market was a second optional print station, available before the print engine on both Digital Pro 3 and Pro 1 models. “Digital Pro’s base hybrid configuration supports over 80 per cent of prime label applications. However, the ability to reverse print or lay flexo inks and coatings prior to digital opens up a lot of opportunity. This especially rings true when you look at the added opacity on clear and metallized films, or jobs that may use multiple spot colors in a single run,” said Chandler Davis, market manager – digital at Mark Andy.

The new features include adding 30 inches of machine footprint and uses UV LED curing technology. A private label ink, ProWhite, certified by Mark Andy and powered by Siegwerk, is available through Mark Andy Print Products.


Alongside the print station, three unique conveyor packages were released to Digital Pro customers and are backwards compatible with over 140 Digital One machines in operation. The conveyors perform basic to advanced roll-to-sheet applications. Operators can cut 2-14” sheets, convey into an output receptacle or shingling table, and batch sheets into set quantities.

Label manufacturers also now have the option to outfit a bypass module to their Digital Pro 3. With this feature, printers can web the press to bypass the digital engine and use the machine as a standalone finishing machine in addition to a digital label press. The bypass boosts press speeds by 35% to 110 fpm (33.5 mpm) and reduces cost of operation and consumable wear when the digital module is not printing.

The last option in this wave of updates is a crush knife assembly for slitting. Crush knives are ideal for many applications and the primary benefit is faster set-up time and cleaner edge slitting. The system supports up to eight knives in the cartridge and achieves a minimum lane size of ½ inch. (12.7 mm).

All features are available on future press builds, and can be added to existing machines in the field.