Mimaki Releases Complete Fabric Printing System

PrintAction Staff
April 17, 2017
By PrintAction Staff
Mimaki’s TX500P-3200DS provides printing modes from high-speed draft (1,399 square feet per hour) to high quality (538 square feet per hour).
Mimaki’s TX500P-3200DS provides printing modes from high-speed draft (1,399 square feet per hour) to high quality (538 square feet per hour).
Mimaki has commercially released its TX500P-3200DS machine, described by the company as a complete digital fabric printing system. The 3.2-metre-wide direct-to-textile printer features an in-line colour fixation unit for soft signage, exhibit graphics, and décor applications. The TX500P-3200DS printer will be on display at the upcoming International Sign Expo, April 20-22, in Las Vegas.

Direct to fabric dye sublimation printing requires fixation of inks through a dry heat process, a step that is traditionally performed separately. The TX500P-3200DS printer, explains Mimaki, utilizes an inline colour fixation unit to optimize the printing and finishing process by enabling simultaneous printing and colour fixation, thereby reducing two steps to one in a single device.

Additionally, the TX500P-3200DS printer provides efficient finishing by linking the printer and the heater units. This enables synchronization, explains Mimaki, so that the printer is initiated when the heater reaches the optimum fixation temperature. Mimaki states this feature helps to control cost by reducing production time, labour, and transfer-related waste.

The TX500P-3200DS printer includes new print heads that enable printing directly onto various types of textiles. The high gap setting, explains Mimaki, gives users the ability to print on thin and thick textiles, plus woven patterns or raised fiber surfaces.

The 12 print heads are arranged in a staggered array and provide a range of printing modes from high-speed draft (1,399 square feet per hour) to high quality (538 square feet per hour).

An Auto Media Feeder (AMF) and a pulling roller provide consistent feeding of fabric by automatically applying the appropriate tension to the fabric during conveyance.

The system also includes waveform control, whereby each ink colour has its own specific gravity and viscosity. To achieve placement of the ink droplets onto the media, Mimaki designed a waveform control that enables the printhead to jet each ink colour at the appropriate jetting angle while maintaining ink droplet circularity.

The system provides variable ink droplet sizes – small, medium and large – and Mimaki Advanced Pass System 4 (MAPS4). This technology incorporates an advanced algorithm that reduces banding, uneven ink drying and bi-directional.

Add comment


Security code
Refresh

Subscription Centre

 
New Subscription
 
Already a Subscriber
 
Customer Service
 
View Digital Magazine Renew

Most Popular

Latest Events

PRINT 17
September 10-14, 2017
Labelexpo Europe
September 25-28, 2017
Pack Expo Las Vegas
September 25-27, 2017